公司新聞

定期頤養鹽水機可以及時發現隱患，才可以及時采取措施，以防毛病的出現。這樣才可以保證產品的消費效率，并延長鹽水機的運用壽命。那要怎樣維護頤養呢？下面是鹽水機的幾點頤養內容:
Regular maintenance saline machine can be found hidden in a timely manner to take timely measures to prevent the problems occur. Only in this way can we guarantee the consumption efficiency and prolong the service life of brine machine. How do the maintenance? Here is some water machine maintenance content:
1.清洗蒸發器/冷凝器：最少要每年度清洗一次，并且是對整個冷卻水系統，包括冷卻水塔、各個管道的清洗，在執行清洗時，應購置特地的清洗劑循環沖洗，或充注在冷卻水中，待24h 后再改換溶液，直至洗凈為止。
1 cleaning evaporator / condenser: minimum annual cleaning time, and the cooling water system, including cleaning cooling towers, each pipeline, in the implementation of the cleaning, the cleaning agent should purchase specially circulating flushing, or filling in the cooling water to be 24h after the change of solution, until the cleaning up.
2.制冷緊縮機：緊縮機是機組的心臟，它的好壞直接關系到鹽水機的穩定性。由于緊縮機的裝置精度請求較高，假如緊縮機發作毛病．普通都需求請鹽水機廠布置人員來停止維修。
2 refrigeration compressor: compressor is the heart of the unit, its quality is directly related to the stability of the chiller. Because the compressor device precision request is high, if compressor failure. Generally need salt water machine factory layout personnel to stop maintenance.
3.改換枯燥過濾器： 枯燥過濾器是保證制冷劑進行正常循環的重要部件。由于水與制冷劑互不相溶，假如系統內含有水分，將大大影響機組的運轉效率，因而堅持系統內部枯燥是非常重要的，枯燥過濾器內部的濾芯必需定期改換。
3 change boring filter: boring filter is to ensure that the refrigerant cycle of the important components. Because of the water and refrigerant immiscible, if the system contains water, will greatly affect the unit's operation efficiency, so it is very important to adhere to the system of internal boring, boring the inside of the filter cartridge must regularly change.
4.充注制冷劑：如沒有其他特殊的緣由，普通機組不會產生大量的走漏。假如由于運用不當或在維修后，有一定量的制冷劑發作走漏．就需要重新添加制冷劑。充注制冷劑必需留意機組運用制冷劑的牌號。
4 refrigerant: if there is no special reason, ordinary units not much leakage. If due to improper use or maintenance after the refrigerant has a certain amount of attack will need to add refrigerant leak. Note the refrigerant must pay attention to the use of refrigerant units.
5.校驗平安閥：鹽水機上的冷凝器和蒸發器均屬于壓力容器，依據規則，要在機組的高壓端即冷凝器本體上裝置平安閥，一旦機組處于非正常的工作環境下時，平安閥能夠自動泄壓，以避免高壓可能對人體形成的傷害。所以平安閥的定期校驗關于整臺機組的平安性是非常重要的。
5 check safety valve: condenser and evaporator brine machine belong to the pressure vessel, according to the rules, to the unit in the high-pressure condenser body on safety valve device, once the unit is in a normal working environment, safety valve capable of automatic pressure relief, pressure to avoid possible damage to human form. Therefore, the regular check valve safety on the entire unit is very important.
6.改換光滑油：機組在長期運用后，光滑油的油質變差，油內部的雜質和水分增加，所以要定期檢查油質，一旦發現問題應及時改換，改換的光滑油牌號必需契合技術材料。
6 change oil: unit in the long-term use, smooth the oil deterioration, impurities and moisture inside the oil increases, so should regularly check the oil, once found that the problem should be timely change, change the oil grade must be in conformity with the technical materials.