行業動態

為了保證用戶購置的鹽水機組可以順利、平安、耐久、穩定的運轉，在機組出廠前全部都會做好試運轉工作。那么，我們今天就談?wù)劄楹我o鹽水機組的緊縮機做無負荷試運轉，以及做無負荷試運轉的請求及步驟。
In order to ensure that the user purchased brine unit can be smooth, safe, durable, stable operation, before the unit will do all the commissioning work. So, let's talk today about why we need to do the no load trial run for the compressor of the brine unit, and how to do the no-load trial run.
一、給鹽水機組做無負荷試運轉的目的
First, the brine unit to do no-load trial operation purposes
鹽水機組的緊縮機無負荷試運轉是不帶閥的試運轉，其目的是使互相運動的零件跑合，檢驗油泵能否上油正常，卸載安裝動作能否靈敏精確，輸油管路能否通暢，肯定有無不正常的部分發熱和不正常聲響。
The compressor unit saline no load test run test run without valve, its purpose is to make each other moving parts running in oil pump, test whether normal unloading installation action whether accurate, pipelines can open, certainly are all normal and abnormal sound part heating.
二、給鹽水機組做無負荷試運轉的要求及步驟
Two, give brine unit do no-load test run requirements and steps
1、啟動鹽水機組的緊縮機并運轉10min后停機檢查各摩擦部位的光滑油和溫升狀況，確認一切正常后在連續運轉1H；
1, start the brine unit compressor and running 10min check the friction parts of the smooth oil and temperature rise condition, confirm all normal after continuous operation 1H;
2、各摩擦部位的溫升不應超越30℃，軸承最高溫度不應超越70℃；
2, the friction temperature rise should not exceed 30 degrees, bearing maximum temperature should not exceed 70 degrees c;
3、光滑油壓力及溫度應負荷設備技術文件的規則；
3, smooth oil pressure and temperature load equipment technical documents rules;
4、軸承處不應有油的滴漏；
4, the bearing should not leak oil;
5、運轉中各運動部件應無異常聲響，緊固件應無松動現象。
5, the movement of the moving parts should be no abnormal sound, fasteners should not loose phenomenon.